| Rainfresh - BP50 - 50 micron(um) | | $999.00 CAD | |
|
High-flow Sediment Filter Cartridges Rainfresh BP series sediment filter cartridges are specifically designed forhigh-flow dirt removal applications such as high-flow UV pre-filtration, Pointof Entry (POE) filtration, etc. They remove dirt, rust, sand, silt and otherparticulate matter from water. BP series filter cartridges aremanufactured using 100% food-grade polypropylene that does not impart any tasteor odour to the water and is resistant to microbial attack. Using superior spun fibre technology, BP series filter cartridges exhibithigh dirt holding capacities and have excellent contaminant removal efficienciesat the rated micron size. Because of their large surface area and volume, theyalso exhibit excellent flow characteristics, making these filters an excellentchoice for any high flow water filtration application. FEATURES - Made up of premium grade polypropylene.
- Highly effective in reduction of particles at rated micron size.
- UNIVERSAL FIT – Fits Rainfresh, Big Blue* & other high-flow filter housings
- Large surface area and over 1” bed depth.
- Resistant to media migration even under high differential pressure.
BENEFITS - Efficient sediment removal over long life
- Higher flow rates
- Low differential pressure
- Excellent filtration characteristics
- Universal Fit - Fits Big Blue®* andother high flow filter housings
*Big Blue ® is a registered trademark of Pentair Inc & is not associated in any way with Envirogard Products Ltd. SPECIFICATIONS- Model: BP50
- Micron Rating nominal: 50μ
- Length (Inch):10”
- O.D (Inch): 4 5/8”
- I.D (Inch): 1”
- Fits Rainfresh Housing*: BH010
- Cartridge Type: Double Open End
- Max Flow Rate: 20 GPM
- Operating Temp: 100°F (38°C)
* - Also fits equivalent competitive high-flow filter housings. NOTE – For use with water only.
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. TESTING & CERTIFICATION  Component certified to NSF/ANSI 61 and CSA B483.1 for material requirements only.
Certification does not extend for use with competitive housings. | 
